Chemical engineer Diego detailed the specific procedures for using sodium percarbonate at home, emphasizing that the variety of cleaning tasks requires different methods. His explanations cover three distinct approaches to laundry care: supplementing the regular wash cycle, preparing a pre-soak for whitening, and direct treatment of stains, each with its own contact times and application techniques. [1]
For normal washing, Diego recommends adding two tablespoons of sodium percarbonate along with your usual detergent. This method aims to enhance detergent efficiency, disinfect laundry, and eliminate unpleasant odors. The specialist also specifies that the wash program should be set to a temperature between 30 and 40 degrees Celsius to achieve optimal effect. [1]
If the main goal is whitening clothes, the procedure involves a pre-treatment before washing. The engineer suggests dissolving two tablespoons of sodium percarbonate in three liters of hot water. The clothes should be left to soak in this solution for one hour, after which they can be washed normally. This soaking phase is an additional step and does not replace the subsequent washing process. [1]
For stain removal, it is recommended to prepare a paste mixture from sodium percarbonate and very hot water. The paste is applied directly to the stain and left to act for 10 minutes. Subsequently, the area should be gently rubbed, the process can be repeated if necessary until the stain disappears completely, before washing the jacket according to the usual procedure.
- Categories:
- Education
